Please Note: A fully comprehensive installation guide comes with your purchase, but here are a couple of the main points:-.

Plumbing Details: The units require a 1 x hot and a 1 x cold water supply feed. The required water pipes, should be installed and fed to a position that is approximately 1 metre off the floor in the corner or central position of the room, where the cabin is to be fitted. Balanced water pressure is required above 2 bar. Should you have a Combi Boiler, you will not need a pump but you will require to have a Pressure Equalising Valve [PEV] fitted, to maintain balanced pressure to both the hot and cold supply at all times.

If your water supply uses a gravity fed system, it is recommended you fit a pump to provide the required water pressure for the shower cabin. Should the main water tank in your property, be situated above the proposed shower head position, then a Positive Head pump will suffice. In circumstances where the shower head is positioned above the main water tank, a Negative Head pump will be needed. Where a pump is being fitted, you will not require a Pressure Equalising Valve, as the pump will keep the pressure balanced on gravity fed systems.

Where an unvented hot water cylinder system like a Mega Flow is installed, these will produce sufficient balanced pressure for our showers to operate efficiently. Other types or brands of unvented hot water cylinders may vary, so it is advisable to check with the individual manufacturers or suppliers. In rare situations where the distance between the hot water cylinder and shower is extreme, i.e. cylinder on the ground floor, shower on the 5th floor, there may be a pressure issue so again, do check this with your installer or manufacturer. This information is for guidance only so in all cases, please confirm your plumbing requirements with your fitter.

We can supply a Salamander Shower Pump [Positive Head] and a Pressure Equalising Valve but do not supply other plumbing materials. The shower enclosures are freestanding units and accordingly, we suggest that your fitter does not install the shower unit into a position where this cannot be moved away from the wall if required. The couplings on the shower cabin that connects this to your water supply, are standard 15mm compression fittings.

General: Also keep in mind that the shower unit is delivered in several large boxes, so please ensure you have enough space to manoeuvre these and the contents, to the installation location. Note as well, that space is required to assemble the steam shower cabin and this needs to be sufficient to allow your installer to work around the assembled shower unit, before placing in the final position.  

For your peace of mind....as a direct sales company, we feel it is important when selling via the internet to make things clear and we also realise the importance of providing not only quality products at great prices, but also the need for back up, plus support for parts and customer queries too.

With the shower cabins, we are officially appointed resellers for the sole UK distributors of the ranges of units we sell and as such, are fully able to provide Customer Support for the products and spare parts too. Our distributors also works with the manufacturer, to improve the products we sell and ensure they meet the standards that we and our customers expect.

GLASS: All the Shower cabins we supply have tempered safety glass of between 5-6mm. The back panels of the cabins are made of tempered glass, so you do not need to tile behind the cabin.  FRAMES: The frames are made of polished aluminium, thus offering good structural support, stability and appearance. The cabins are designed to be free standing and to enable easy servicing should the need arise.  Trays: All shower trays in the cabins are fitted with a fully supporting framework bonded to the tray, which affords a stable footing and assists in offering overall structural stability.

THERMOSTATIC VALVE: All units have thermostatic valves - this enables you to mix the water temperature to your requirements, with a safety device built in to allow water up to 38 degrees only. CERTIFICATION: CE, RoHS industries approvals. The steam generator and pump we use pass TUV approval and the pumps also pass UL approval